SPECIFICATION |
| Maximum web width |
330mm (13˝) |
| Minimum web width |
200mm (77/8˝) |
| Unwind mandrel diameter |
76mm (3˝) air expanding |
| Maximum unwind roll diameter |
700mm (28˝) |
| Rewind mandrel diameter |
76mm (3˝) air expanding |
| Maximum rewind roll diameter |
700mm (28˝) |
| Maximum mechanical speed |
100 metres (328 ft) per minute |
| |
| Note: maximum speed depends upon
substrate and coating |
| |
| COATING
SYSTEM |
| • Flexographic printing
station |
| • Cylinder range |
254mm-635mm (10˝-25˝) |
| • 1/8˝ pitch gearing |
• Incorporating a quick
change cassette system enabling the
complete ink tray and ink train to be removed
in seconds |
• Ink train consisting
of ink tray, ceramic anilox roller,
rubber meter roller and reverse angle doctor
blade |
| • Automatic throw off
on stop |
| • Blown hot air drying
system |
| |
| OPTIONAL EXTRAS |
| • Corona discharge unit for conductive/non
conductive materials |
| • Electronic web guide with ultrasonic sensor |
| • Additional flexo cartridge |
| • Additional coating roller |
| • Ink pump |
| • Servo re-registration device |
| • Additional anilox rollers |
| • Air cooled UV drying system |
| • Scissor slitting unit including 3 knives |
| • Razor blade slitting cassette |
| • Pneumatic lay on roller |
| • Overlaminating system with driven unwind
for soft tension |
| |
| DIMENSIONS |
| 2.1M long x 1.4M wide x1.6M high |
Digicon
Series 2
